JVC LX-D1010G - Lcd Projector Service Manual page 28

LX-D1010G
4.13. Removing the LCD Block
Caution
* * * * All workers should wear wristbands to prevent static
electricity. LCD panels are especially prone to
damage from static electricity.
(1) Remove the Top Case Ass'y.(see 4.2)
(2) Remove the Lamp Power Unit.(see 4.3)
(3) Remove the (Main PWB, Video PWB, Inlet Switch PWB
and Terminal Board) Ass'y.(see 4.4)
(4) Remove the Optical Ass'y.(see 4.10)
(5) Remove 6 Screws AA and then remove the Cooling
Cover of the bottom.
Screws AA
(6) Hold the LCD Block to remove 3 Screws AB and then
take out the LCD Block.
Screws AB
4-6 (PA012)
4.14. Removing the Exhaust Fan Ass'y
(1) Remove the Top Case Ass'y.(see 4.2)
(2) Remove the Lamp Power Unit.(see 4.3)
(3) Remove the (Main PWB, Video PWB, Inlet Switch PWB
and Terminal Board) Ass'y.(see 4.4)
(4) Remove the Optical Ass'y.(see 4.10)
(5) Remove 2 Screws AC and then remove the Exhaust Fan
Ass'y.
Cooling Cover
Exhaust Fan Ass'y
Screws AC