Connecting The Machine; Connecting To The Interfaces - Ricoh MP161SPF General Settings Manual

1. Connecting the Machine

This chapter describes how to connect the machine to the network and specify
the network settings.

Connecting to the Interfaces

This section explains how to identify the machine's interface and connect the
machine according to the network environment.
For machines with the DDST Unit, see "Confirming Connection", Network
Guide, and "Connecting the machine", Printer/Scanner Reference.
1.
USB port
Port for connecting the USB 2.0 cable
2.
10BASE-T/100BASE-TX port
Port for connecting the 10BASE-T or
100BASE-TX cable
Note
❒ You cannot install two or more of the following options: IEEE 802.11b (wire-
less LAN) board, IEEE 1284 interface board.
Reference
"Confirming Connection", Network Guide
"Connecting the machine", Printer/Scanner Reference
ARH008S
3.
IEEE 1284 port (optional)
Port for connecting the IEEE 1284 inter-
face cable
4.
IEEE 802.11b (Wireless LAN) port
(optional)
Port for using the wireless LAN
7