Ieee 802.11B (Wireless Lan) - Ricoh MP161SPF General Settings Manual

Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒ When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒ When SMTP Authentication is set to [On], also make setting for Admin. E-
mail Address.
❒ E-mail Communication Port and Fax E-mail Account must be specified in or-
der to use the reception function.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.48 "Interface Settings"
p.55 "File Transfer"

IEEE 802.11b (wireless LAN)

This section lists the settings required for using Internet FAX with IEEE 802.11b
(wireless LAN).
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communictn.
Interface Settings/Network Permit SSL/TLS Comm.
Interface Settings/Network Host Name
Interface Settings/
IEEE 802.11b
User Tool
Communication Mode
Network Settings
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
Necessary
1
19