Setting The Split Point - Yamaha Clavinova CVP-809 Owner's Manual

Maintaining the Left Voice (even when releasing the keys)
When the Left Hold function is set to "On" via [Menu] → [Keyboard], the Voice for the Left part is held
even when the keys are released. Non-decaying Voices such as strings are held continuously, while decay-
type Voices such as piano decay more slowly (as if the sustain pedal has been pressed).
When the Left Hold is "On, " an "H" indication appears at the left side of the keyboard illustration in the
center of the Home display.

Setting the Split Point

The key which divides the keyboard into two or three
areas is referred to as "Split Point. " There are two types of
Split Point: "Left Split Point" and "Style Split Point. " The
"Left Split Point" divides the keyboard into the Left part
area and Main part area while the "Style Split Point"
divides the keyboard into the Chord section for Style
playback (page 58) and the Main or Left part area.
Though both Split Points are at the same key (F
default, you can also set them individually (as shown).
NOTE
The guide lamp located at the Split Point lights up when the Left part is
turned on or the [ACMP ON/OFF] button is turned on.
1
Call up the Split Point/Fingering
window: [Menu] → [Split&Fingering].
NOTE
The Split Point/Fingering window can be called up also by
holding the keyboard illustration on the Home display.
2
Touch [Left] or [Style] to turn it on.
If you want to set both Split Points to the same
key, turn both of them on.
3
Touch []/[] to select the desired key
as Split Point.
You can set the Split Point also by pressing the actual key while holding down the keyboard
illustration on the display.
NOTE
The Left Split Point cannot be set lower than the Style Split Point.
52
CVP-809/CVP-805 Owner's Manual
Left part
Chord section
P
2) by
Style Split Point
Style
Split Point
2
Left Split Point
Main (and Layer) part
Left part, Main (and Layer) part
Left Split Point
3