Transpose Buttons - Yamaha Artiste AR-80 Electone Owner's Manual

TRANSPOSE Buttons

Transpose can also be set from the panel, with the TRANSPOSE
´ / Ï buttons. Press TRANSPOSE
setting by a half-step, and press TRANSPOSE
The current Transpose setting is shown in the Voice Display.
Current Transpose setting.
About the Pitch of the Voice Sections
The various Voice sections and sounds of the instrument are set to different pitches (as shown
below).
+6.0
+3.0
+2.4
+1.2
(Standard 440Hz) 0
Ï
TRANSPOSE
DATA CONTROL
Cent
LEAD1
UPPER ORGAN
UPPER1
UPPER2
LOWER1, LOWER ORGAN, KEYBOARD PERCUSSION, ACCOMPANIMENT
-1.2 LOWER2
-3.6
PEDAL1&2, PEDAL ORGAN
to raise the Transpose
´ to lower it.
PROGRAM
COARSE
161
• The default Pitch setting is
440.0Hz (at A3).
• Pitch changes cannot be
recorded to the Music Disk
Recorder.
VOICE EFFECT
DISPLAY SET
FOOT REGIST.
SW. SHIFT
M.O.C./ VOICE
L.M.SPLIT EDIT
ACCOMP. SEQUENCE
PROGRAM
PITCH/
DISK MIDI
When tuning the AR-80 to
HELP HOLD
match the pitch of another
instrument, use the Clarinet
voice on the Lower keyboard,
and make sure that effects
such as Tremolo or
TRANSPOSE Symphonic are turned off.