Fiery KM-C3130 User Software Installation Manual page 94

2
2-12 Installing User Software on a Mac OS Computer
3. Enter the appropriate information for the Fiery S300.
4. When you have added all the information, click Add.
5. With the device name selected in the Devices list, click OK.
6. With the device name selected in the list of Available Servers, click Select to begin
Fiery S300 and device
name (31C-M)
—Enter a name for the Fiery S300. It does not have to match the actual
Nickname
server name of the Fiery S300.
The nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—TCP/IP is the only supported network protocol, so no selection is necessary.
Protocol
—Enter the IP address (or DNS or hosts name) of the Fiery S300.
Server Name
—Enter the name of the device the Fiery S300 is connected to:
New Device
This device name appears in the Printer Setup section of the Configuration page.
The device name is case sensitive; enter it exactly as it appears here.
N :
OTE
The Fiery S300 appears in the list of available servers. The first line of the entry
displays the nickname you gave the server, followed by the protocol. The second line
displays the device name.
using ColorWise Pro Tools.
.
31C-M