Fiery KM-C3130 User Software Installation Manual page 58

1
1-42 Installing User Software on a Windows Computer
Setting up SMB printing on Windows 2000/XP
SMB printing (also known as Windows printing) allows you to install the printer
driver and associated files, and print from your computer to a particular print
connection (Hold, Print, or Direct) on the Fiery S300. These instructions assume you
have installed the TCP/IP protocol and Client for Microsoft Networks.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. To set up printing to a second or third print connection, repeat the
procedure, "To set up SMB printing on Windows 2000/XP"
install more than one printer, give each a descriptive name during printer driver
installation, such as
With Windows 2000/XP, the printer driver must be installed from the User
N :
OTE
Software CD. You cannot use Point and Print to install the driver and configure the
printing connection to the Fiery S300 in a single procedure.
B
EFORE YOU BEGIN
• Configure the Fiery S300 for SMB printing in Network Setup>
Service Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page. For more information, see the
T SMB
O SET UP PRINTING ON
1. Open My Network Places.
2. Browse for the printer you want to print to.
The printer name you are browsing for is the name entered in Network Setup>
Service Setup>Windows Setup>Server Name. For this information, see the
Configuration page.
The amount of network traffic determines the amount of time required for the
Browse function.
Aero-Print or Aero-Hold , so you can easily identify printers.
W 2000/XP
INDOWS
on page 1-42. If you
Configuration Guide.