Fiery KM-C3130 User Software Installation Manual page 26

1
1-10 Installing User Software on a Windows Computer
6. Click the printer icon for the NetWare print queue you want to use, and then click OK.
7. In the Add Port dialog box, verify that the network path is updated and click OK.
Your print jobs are transmitted to the specified print queue on the Novell file server.
The Fiery S300 polls the file server, and if jobs are present, they are transmitted to
the Fiery S300.
8. To confirm the connection, click the General tab, click Apply, and then click Print
Test Page.
After the Test Page prints successfully, you are ready to print from the computer.
Setting up SMB printing with Windows 9x/Me
SMB printing (also known as Windows or WINS printing) allows you to install the
PostScript printer driver and printer description files on your computer from the
Fiery S300 using Point and Print, and print to a particular connection (Hold, Print, or
Direct). To set up SMB printing, you must have the TCP/IP protocol and Client for
Microsoft Networks installed.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. Repeat the procedure
for each connection. If you install more than one printer, give each a descriptive name
during printer driver installation, such as
identify printers.
B
EFORE YOU BEGIN
• Configure the Fiery S300 for SMB printing in Run Setup>Network Setup>Service
Setup >Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page.
"To set up SMB printing on Windows 9x/Me"
or
Aero-Print Aero-Hold
, so you can easily