Fiery KM-C3130 User Software Installation Manual page 59

1
1-43 Setting up PostScript printing with Windows 2000/XP
You can also locate the printer using the Search feature on your Windows
N :
OTE
computer. Right-click My Network Places and click Search for Computers. Type the
name of the printer and click Search Now.
If you are not able to locate your Fiery S300, contact your network administrator.
3. Double-click the name of the Fiery S300 to display enabled print connections.
You must now create a printer port and install the printer driver from the User
Software CD.
You cannot use Point and Print to install the driver and configure the printing
N :
OTE
connection to the Fiery S300 in a single procedure.
4. On Windows 2000, click Start, choose Settings, and then choose Printers.
On Windows XP, click Start and choose Printers and Faxes.
5. On Windows 2000, double-click Add Printer and click Next.
On Windows XP, click Add a printer and click Next.
6. Click Local Printer and click Next.
7. Click Create a New Port, and choose Local Port from the menu. Click Next.
8. In the Port Name dialog box, type the name of the Fiery S300, followed by the
printing connection, and click OK.
Enter the port name as follows:
and print is the printing connection.
9. In the dialog box displaying lists of manufacturers and printers, click Have Disk.
You will now install the printer driver from the User Software CD.
10. Insert the User Software CD into the CD-ROM drive. Type the name of the CD-ROM drive
and browse to the English\Prntdrvr\Ps_drvr\Win_2000 or
English\Prntdrvr\Ps_drvr\Win_XP folder.
11. Make sure "Oemsetup.inf" or "Oemsetup" is selected and click Open.
12. Verify the path is correct in the Install From Disk dialog box and click OK.
\\Aero\print where Aero is the name of the Fiery S300