Fiery KM-C3130 User Software Installation Manual page 54

1
1-38 Installing User Software on a Windows Computer
8. Click Finish to close the Add Standard TCP/IP Printer Port Wizard dialog box and click
Close in the Printer Ports dialog box.
9. Click Configure Port in the Properties dialog box.
The Configure Standard TCP/IP Port Monitor dialog box appears.
10. If you have LPD printing enabled at the Fiery S300 Control Panel, select LPR for
Protocol and LPR Byte Counting Enabled under LPR Settings.
You can also proceed without selecting LPR Byte Counting Enabled under
N :
OTE
LPR settings.
11. If you have Port 9100 printing enabled at the Fiery S300 Control Panel, select Raw
(Windows XP).
The port number 9100 automatically appears under Raw Settings. This is the default
port number for the printer driver. With this port number, you can print to the printer
connection selected for Port 9100 printing at the Fiery S300 Control Panel. If you
want to specify a specific printer connection, proceed to step 12.