Fiery KM-C3130 User Software Installation Manual page 28

1
1-12 Installing User Software on a Windows Computer
7. Type a name for the Fiery S300 in the Printer name field and choose whether to make
it the default printer. Click Next.
8. If you want to print a Test Page, choose Yes and click Finish.
The necessary files are installed to your computer.
If the Test Page prints successfully, you are ready to print from the computer.
Setting up IPP printing with Windows 9x/Me
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery S300 over
the Internet.
IPP printing is supported on Windows 2000/XP but can be enabled on
Windows 9x/Me computers by installing the "wpnpins.exe" client file (available on the
Windows Me CD or the Windows 2000 Server CD). For more information about
obtaining and installing this client, contact the Microsoft Corporation or Microsoft
Technical Support.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers. See "To install the PostScript printer driver for Windows 9x/Me"
B
EFORE YOU BEGIN
1. Prepare the Fiery S300 for TCP/IP printing.
2. Make sure the Fiery S300 is configured for IPP printing.
For more information, see the
3. Specify the printing destination on your computer.
T IPP
O SET UP PRINTING WITH
1. Click Start, choose Settings, and then choose Printers.
2. In the Printers windows, click the Fiery S300 icon and choose Properties from the
File menu.
3. Click the Details tab and click Add Port.
The Add Port dialog box appears.
Configuration Guide.
W 9 /M
INDOWS X E
on page 1-2.