Fiery KM-C3130 User Software Installation Manual page 70

1
1-54 Installing User Software on a Windows Computer
3. Enter the appropriate information for the Fiery S300.
4. When you have entered all the information, click Add.
5. With the device name (31C-M) selected in the Devices list, click OK.
Device name of the
Fiery S300 (31C-M)
—Enter a name for the Fiery S300. This name does not have to match the
Nickname
actual Server Name of the Fiery S300.
The nickname cannot contain any of the following seven characters:
N :
OTE
[ ] _ " ' <space> <tab>
—Choose the type of network protocol you are using from the menu.
Protocol
Fiery utilities are not supported over IPX/SPX. Command WorkStation is
N :
OTE
supported on Windows computers over TCP/IP.
—Enter the IP address (or DNS name) of the Fiery S300.
Server Name
—Enter the name of the device the Fiery S300 is connected to:
New Device
Type 31C-M exactly as shown because this term is case-sensitive.
N :
OTE
The Fiery S300 appears in the list of available servers. The first line of the entry
displays the nickname you gave the server, followed by the protocol you chose.
The second line displays the device name.
.
31C-M