1
1-58 Installing User Software on a Windows Computer
7. Click the server name.
The Log In dialog box appears.
8. Select Administrator, Operator, or Guest and click Log In.
Your computer is connected to the server.
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery S300 server or
network, such as a server name or IP address. If you change Fiery S300 Setup
information, do so before reconfiguring the connection.
T
O MODIFY THE CONFIGURATION
1. Start Command WorkStation.
The Login Server window appears.
2. Select the Fiery S300 server for which you want to modify the configuration,
and click Remove.
The Available Servers dialog box appears.
3. To add the modified Fiery S300 server, follows steps
procedure,
"To configure the connection for Command WorkStation"
page 1-55.
To modify the connection to the Fiery S300, you must remove the server from the
Login Server list and follow the procedure for configuring the connection.
3
through
6
of the
on