Fiery KM-C3130 User Software Installation Manual page 106

2
2-24 Installing User Software on a Mac OS Computer
4. Select the profile that corresponds to the Fiery S300 from the Profile menu.
Three profiles are provided: Fiery 31C-M ICC, Fiery 31C-M 100GCR ICC,
N :
OTE
and Fiery 31C-M HiGCR ICC. For more information on using profiles, see the
Color Guide.
5. Click OK.
For more information about ICC profiles, see your Photoshop documentation.
Loading monitor settings and the ICC device profile in Photoshop 6.x/7.x
In Photoshop 6.x and 7.x, you can load the monitor settings file and the ICC device
profile at the same time.
T
O LOAD THE MONITOR SETTINGS FILE AND THE
P 6. /7.
IN HOTOSHOP X X
1. Start Photoshop.
2. Choose Color Settings from the Edit menu and then choose Advanced Mode.
3. Choose EFI RGB from the RGB menu.
4. Choose the profile that corresponds to the Fiery S300 from the CMYK menu.
Three profiles are provided: Fiery 31C-M ICC, Fiery 31C-M 100GCR ICC,
N :
OTE
and Fiery 31C-M HiGCR ICC. For more information on using profiles, see the
Color Guide.
5. Click OK.
For more information, see your Photoshop documentation.
ICC
DEVICE PROFILE