Fiery KM-C3130 User Software Installation Manual page 41

1
1-25 Setting up PostScript printing with Windows NT 4.0
The Fiery S300 polls the NetWare server for print jobs in the print connection defined
for the Fiery S300. When you print, your PostScript files are spooled to that
connection and transmitted over the queue "port" to the Fiery S300.
Setting up SMB printing on Windows NT 4.0
SMB printing (also known as Windows printing) allows you to install the PostScript
printer driver and printer description files, and print from your computer to a
particular print connection (Hold, Print, or Direct) on the Fiery S300. These
instructions assume you have installed the TCP/IP protocol and Client for
Microsoft Networks.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. To set up printing to a second or third print connection, repeat the
procedure "To set up SMB printing on Windows NT 4.0"
more than one printer, give each a descriptive name during printer driver installation,
such as Aero-Print
To change printer defaults and configure installable options from Windows
N :
OTE
NT 4.0, you must log on as
Fiery S300 Setup. If you log on as a User, you can install the printer driver through
Point and Print, but you cannot modify printer defaults or configure installable
options.
B
EFORE YOU BEGIN
• Configure the Fiery S300 for SMB printing in Run Setup>Network Setup>
Service Setup> Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page. For more information, see the
• Specify to install the PS printer driver using Point and Print in Network Setup>
Service Setup> Windows Setup> Point and Print Drivers.
If you set up SMB printing using Point and Print, to correctly specify Installable
N :
OTE
Options, install the printer driver from the User Software CD or download the driver
for installation from the Fiery WebTools Installer.
or Aero-Hold , so you can easily identify printers.
efi_admin_efi and use the password specified in
on page 1-26. If you install
Configuration Guide.