Fiery KM-C3130 User Software Installation Manual page 38

1
1-22 Installing User Software on a Windows Computer
5. Type one of the following printer names, depending on the Fiery S300 connection you
want to print to.
print
hold
direct
This name is case-sensitive; type it exactly as shown.
N :
OTE
6. Click OK.
The computer checks the address or DNS name you entered and notifies you if it
cannot resolve the address.
7. Click Close in the Printer Ports dialog box.
The new port configuration is reflected in the Ports tab. You must close the Printer
Properties dialog box to verify the connection.
8. Click OK to close the Printer Properties dialog box.
9. Reopen the Printer Properties dialog box.
10. Click the General tab and click Print Test Page.
11. The printer Job Notes window appears. Enter user and job identification information
for accounting purposes, whatever is required at your site and click OK.
When you print, your PostScript files are transmitted over the LPR Port connection to
the Fiery S300.
12. Click OK to close the Printer Properties dialog box.