Fiery KM-C3130 User Software Installation Manual page 60

1
1-44 Installing User Software on a Windows Computer
13. Follow the on-screen instructions.
For more information, see
for Windows 2000/XP"
Setting up IPP printing with Windows 2000/XP
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery S300 over
the Internet.
IPP printing is supported directly for Windows 2000/XP computers. IPP printing is
not supported on Windows NT 4.0.
The IPP setup procedures are performed after installing the appropriate printer
N :
OTE
drivers (see "To install the PostScript printer driver for Windows 2000/XP"
page 1-28).
B
EFORE YOU BEGIN
1. Prepare the Fiery S300 for TCP/IP printing.
2. Make sure the Fiery S300 is configured for IPP printing.
For more information, see the
3. Specify the printing destination on your computer.
T IPP
O SET UP PRINTING WITH
1. On Windows 2000, click Start, choose Settings, and then choose Printers.
On Windows XP, click Start and choose Printers and Faxes.
2. On Windows 2000, double-click the Add Printer icon and click Next.
On Windows XP, click Add a printer and click Next.
3. Select Network printer and click Next.
4. Select "Connect to a printer on the Internet or on your intranet." Type an IP address
or computer name in the URL field.
The URL for the printer is the IP address or DNS name followed by "ipp" and the
connection you want to print to (
different elements.
"To install the PostScript printer driver
on page 1-28.
Configuration Guide.
W 2000/XP
INDOWS
print , hold , or direct ). Insert slashes between the
on