Installing the Device
Figure 3-1 Tabletop or Shelf Installation
3.3.2
Rackmount Installation
To install the 2H252-25R in a 19-inch rack, Enterasys Networks includes a strain-relief bracket for
cable management and an accessory kit containing the rackmount brackets, and mounting screws
to attach the rackmount brackets and strain-relief bracket.
Guidelines for the Rackmount Installation
The installation site must be within reach of the network cabling and meet the requirements listed
below:
•
An appropriate grounded power receptacle must be located within seven feet of the location.
•
Maintain a temperature of between 5°C (41°F) and 40°C (104°F) at the installation site with
fluctuations of less than 10°C (18°F) per hour.
3-4
Installation