Model 113,298090 - Craftsman 113.298090 Owner's Manual

8. Insert a 1/4-20 x I trusshead screw through bottom
hole
in the bracket, and through the FIRST hole in
the right hand extension. Install a iockwasher and
nut on the screw. Hand tighten the nut.
9. Insert a 1/4-20 x I truss head screw through bottom
hole in the other bracket and the FOURTH hole of
the extension. Install a Iockwasher and nut on the
screw. Hand tighten the nut.
10. insert the 1/4-20 x 1 truss head screws through the
FIRST and FOURTH holes in the left extension
without brackets. Install a Iockwasher and nut on
each screw and hand tighten.
MODEL 113,298090
INSTALLING RIP FENCE GUIDE BARS
AND SWITCH BOX
1. From among the loose parts, find the following hard-
ware:
*3 Hex Head Screws, 5/16-18 x 1-1/2
*3 Hex Head Screws, 5/16-18 x 1
*2 Hex Head Screws, 5/16-18 x 3/4
*8 Hex Jam Nuts, 5/16-18
*4 Fiat Washers, 21/64 x 5/8 x 1/16
*3 Spacers, 3/4 dia. x 1/2 long
"10 Lockwashers, 5/16 External
Items marked with an asterisk (*) are shown actual size.
5/16-18 x 3/4
HEX HD. SCREW
G
5/16 IN. EXTERNAL 5/16 iN.
LOCKWASHERS HEXJAM NUT
5/16-18 X 1-1/2 IN. HEX HD. SCREW
5/16-18 x 1 IN.
HEX HD. SCREW
21/64 IN. WASHER
1/2 IN. SPACER
REAR GUIDE BAR
2. Position guide bars on floor and install hardware as _ /
shown. Just start the nuts on the end of the screws, I \,_ EXT. LOCKWASHER
8TH SLOT 5/16 IN REX HEAD SCREW
DO NOT screw nuts on all the way. (FOR MOUNTING-"__,-\ I " -
TO BRACKET) `='''''-_ _ IFLAT WASHER 1 IN. LONG
SWITCtH ASSEM.__%'_t 3RD SLOT /
MOUNTING-H-OLES _ __- [ _ 1ST SLOT
(FOR MOUNTING _ _6 _-_._ ..,<.._(_.)'_J_ _ 5116 IN.
TO
BRACKET) _..__.._ FLAT WASHER/
2N D SLOT _"_'__ S P A C E R _ _.,_J" ,x
H R CK ER
1ST SLOT ]
FRONT GUIDE BAR
23