BOTH MODELS
The Fence should slide easily a!ong the Guide Bars and
always remain in alignment (parallel to sawbiade and
Miter Gauge Grooves).
The alignment is maintained by a spring underneath the
Fence which bears against the Front Guide Bar.
To move the Fence, loosen the Lock Handle and grasp
the Fence with one hand at the front.
For very close adjustments, grasp the Guide Bar with
both hands and move the Fence with your thumbs.
-b
BOTH MODELS
SELF-ALIGNING
SPRING
ADJUSTMENT
Place Fence on saw but DO NOT LOCK IT.
Move the REAR END of the Fence slightly to the right of
left. When you release it, the Fence should "spring" back
to its original position.
If it does not, the spring pressure must be INCREASED.