Setting Up Your Printer - Epson C82378 Administrator's Manual

4. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See "Password" on page 10-30 for
information on setting the password.
5. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Then, follow the on-screen instructions to reset the
printer.

Setting up your printer

1. Click Start, point to Settings, and then click Printers.
2. Double-click Add Printer to start the Add Printer wizard, and
then click Next.
3. Click the Network printer radio button and click Next.
4. Select the Connect to a printer on the Internet or on your
intranet radio button.
5. Enter the URL of the target printer using the format below.
The URL should be same as the URL you set in the EpsonNet
WebAssist's IPP configuration page.
http://the IP address of the printer:631/the printer name
Example: http://192.168.100.201:631/EPSON_IPP_Printer
6. Follow the on-screen instructions to install the printer driver.
Settings for Windows 2000/NT
6-22