Table of Contents
Advertisement
Configuring for AppleTalk Using EpsonNet WebAssist
You can use EpsonNet WebAssist after setting the IP address of
the network adapter, as described in Chapter 3.
Note:
❏ A web browser must be installed in your computer.
❏ TCP/IP is correctly set for the computer and network adapter.
❏ Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
❏ There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS manual.
1. Turn on the printer with the network adapter.
2. Run EpsonNet WebAssist by either way described below.
❏ Run EpsonNet WinAssist or EpsonNet MacAssist. Select
the printer that you want to configure from the list and
click Launch Browser.
❏ Open your browser, and type in the IP address of the
network adapter directly. Do not run EpsonNet
WinAssist or MacAssist.
http://the IP address of the network adapter/
Settings for Macintosh
7-9
Advertisement
Table of Contents
