Epson C82378 Administrator's Manual page 49

9. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see "About passwords" on page 10-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
network adapter, you must wait until the on-screen message
appears before turning off your printer.
Note:
❏ Since the new settings are sent to the network adapter, you must
wait until this message appears before turning off the printer.
❏ Printer Objects (named PR0) are automatically created when
you save the settings using EpsonNet WinAssist. Use
PCONSOLE or NWAdmin to change the printer name.
Settings for NetWare
4-10