Epson C82378 Administrator's Manual page 169

TCP/IP
Items
Get IP Address
IP Address
Subnet Mask
Default Gateway
SUBMIT button
AppleTalk
Items
AppleTalk
Printer Name
Entity Type
Zone Name
Network Number Set
Network Number for
Manual Mode
SUBMIT button
Explanations
Select the method of acquiring the IP address, either
Auto or Manual. When Auto is selected, DHCP is
available. To use the DHCP server, it must be installed
in your computer and must be correctly configured.
See your operating system's online help for detailed
instructions.
To set the IP address manually, select Manual.
Enter the IP address for the network adapter if set to
Manual. Be sure to give an IP address which does not
conflict with any other device on the network.
Set the subnet mask.
Set the gateway address if needed.
Saves any changes.
Explanations
Enable or Disable AppleTalk.
Enter the name of the printer attached to the network
adapter (up to 32 characters).
Displays the entity type of the printer. Enter EPSONLQ2
to set the entity type for the printer.
The zone is automatically selected when you enter "✽"
for the Zone Name and select Auto for the Network
Number Set.
Select Auto or Manual. Usually Auto is recommended.
Enter the network number when you select to set the
Network Number manually.
Saves any changes.
The EpsonNet Configuration Utility
10-26