Printing With Netbeui; Configuring For Netbeui Using Epsonnet Winassist - Epson C82378 Administrator's Manual

Printing with NetBEUI

This section explains how to configure the network adapter for
NetBEUI using EpsonNet WinAssist or WebAssist.
Note:
To print with NetBEUI from Windows 2000, the NetBEUI protocol and
Client for Microsoft Networks must be installed; and to print with
NetBEUI from Windows NT 4.0/3.51, NetBEUI protocol and
Workstation must be installed on your computer. See "Installing the
NetBEUI Protocol" on page A-10 for instructions.

Configuring for NetBEUI using EpsonNet WinAssist

You can use the network adapter with the default settings for
NetBEUI. If you want to change the default settings, use
EpsonNet WinAssist or WebAssist. The default values for
NetBEUI are as follows;
Items
NetBIOS name
Workgroup name
Device name
To configure the network adapter for NetBEUI, follow the steps
below.
Note:
❏ TCP/IP or IPX must be installed on your computer.
❏ Before following the steps below, you must have set the IP address
for the network adapter or logged in to the NetWare server's NDS
context as an ADMIN.
1. Turn on the printer with the network adapter.
Default values
EPxxxxxx
WORKGROUP
EPSON
Settings for Windows 2000/NT
6-9