Instructions For Using A Dial-Up Network; Using A Dial-Up Network In Each Mode - Epson C82378 Administrator's Manual

11. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.

Instructions for Using a Dial-Up Network

This section explains about using a dial-up network.
Note:
The primary server described in this manual indicates a primary time
server which offers time to the workstations on the network.

Using a dial-up network in each mode

Print Server mode
You must use a dedicated dial-up line.
Since polling is performed on the file server in the print server
mode, no vicarious response by the router is possible.
Therefore, no dial-up connection is possible in this case.
Remote Printer mode
In Remote Printer mode, use of a router with a vicarious
response function allows the primary server to be installed at
the dial-up destination. However, an extra account might be
generated when the primary server is down. To avoid that, it
is recommend to use connections via a dedicated dial-up line.
Follow the instructions for using a dial-up line.
Settings for NetWare
4-46