Epson C82378 Administrator's Manual page 122

Zone Name:
Select the network zone in which you want the printer to
appear.
Network Number Set:
Select either Auto or Manual. Auto is usually preferred.
Network Number for Manual Mode:
Type a value between 0 and 65534 when Manual is selected
for Network Number Set.
6. After making settings, click Send. The Password dialog box
appears.
7. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see "About passwords" on page 10-19.
After updating is complete, refresh the configuration. To do
this, quit and restart EpsonNet MacAssist.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
Internal Print Server, you must wait until the on-screen
message appears to turn off your printer.
Settings for Macintosh
7-4