Installing An Option Card - Lexmark W812 Setup Manual

Install a hard disk with adapter card
to add additional storage space to
your printer.
30
Install memory, firmware, or option cards
Installing an
option card
Install an RS-232C Serial/Parallel
1284-C Interface Card to add a
serial port or a parallel port.
Your printer has one option card slot that
supports the following option cards:
•
Hard disk with adapter card
• MarkNet internal print server
•
RS-232C Serial/Parallel 1284-C
Interface Card
Install a MarkNet internal print server to
add an Ethernet or Token-Ring port for
connecting your printer to a network.
Follow the instructions in this section to
install your option card:
1
Remove the system board access
panel (see page 25).
2
Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
Save the screw.