Troubleshooting For Scanning; Problems Indicated By Messages On The Lcd Screen Or Status Light; Problems When Starting A Scan - Epson All in One Printer User Manual

User's Guide

Troubleshooting for Scanning

Problems Indicated by Messages on the LCD Screen or
Status Light
❏ Make sure the product is connected to your computer properly.
❏ Turn off the product and turn it on again. If the problem is not solved, the product may be malfunctioning, or the
light source in the scanner unit may need to be replaced. Contact your dealer.
❏ Make sure the scanning software is fully installed.
For more details about reinstalling, visit your local Epson Web site.
"Where To Get Help" on page 202
&

Problems When Starting a Scan

❏ Check the status light and make sure the product is ready to scan.
❏ Make sure your cables are securely connected to the product and a working electrical outlet.
❏ Turn off the product and computer, and then check the interface cable connection between them to make sure it is
secure.
❏ Make sure you select the correct product if a scanner list appears when starting to scan.
❏ Connect the product directly to the computer's external USB port or through one USB hub only. The product may
not work properly when connected to the computer through more than one USB hub. If the problem persists, try
connecting the product directly to the computer.
❏ If more than one product is connected to your computer, it may not work. Connect only the product you want to
use, and then try scanning again.
❏ If the scanning software does not work properly, uninstall the software first and then reinstall it.
"Uninstalling Your Software" on page 143
&
For more details about reinstall, visit your local Epson Web site for further instructions.
"Where To Get Help" on page 202
&
❏ If you have clicked the Keep Blocking button in the Windows Security Alert window during or after installation of
the Epson Software, unblock Document Capture Pro.
"How to unblock Document Capture Pro" on page 173
&
❏ When the printer's Access Control is set to On, you need to enter your user name and password in EPSON Scan
Settings to use EPSON Scan.
"Settings for Access Control (For Windows only)" on page 63
&
❏ To use Scan to Document Capture Pro, you need to install Document Capture Pro and register a job in advance.
"Document Capture Pro" on page 72
&
Troubleshooting for Scanning
172