Printing With Bluetooth - Epson Stylus Photo RX600 User Manual

Printing With Bluetooth

When you print using Bluetooth, you need to select print settings in the RX600's
Setup menu, then send a photo to the printer from your Bluetooth-enabled
device. Below are basic steps for printing using the Bluetooth Photo Print adapter
and your RX600. See the documentation that came with your Bluetooth Photo
Print adapter and your Bluetooth-enabled device for additional instructions.
1. Turn on your Stylus Photo RX600 and press the
2. Use the d button to highlight
3. Press the
4. Choose the Paper Type, Paper Size, Layout, Resolution, and other print
settings (see page 90 for details).
5. Select the photo you want to print from your Bluetooth device and send it to
the printer. (Make sure you are within about 30 feet of the printer.) Printing
starts automatically using the settings you chose.
Note:
Available settings may vary among Bluetooth-enabled devices. For more
information, refer to your device's documentation.
With Windows, you must use the software included with your computer's
Bluetooth adapter to set up a connection with your printer. Your adapter may let
you print using your Epson printer software. See the documentation included with
your computer's Bluetooth adapter.
With Macintosh OS X 10.2 or later, you can use the Bluetooth Setup Assistant to
set up a connection with the printer and Bluetooth File Exchange to send a photo
(see page 119 for file formats) to the printer. See Mac Help for more information.
126
Printing From Other Devices
button.
OK
Direct print image set.
button.
Setup