Gold's Gym POWER FLEX User Manual page 9

Attach a Pull-up Handle (18) to the Top Frame (4)
with four MIO x 20mm Button Bolts (83) and four
M10 Washers (91),
Slide a Top Arm Cap (20) over the Pull-up Handle
(18) and onto the Top Frame (4),
Press a 32mm Round Outer Cap (22) onto the
Pull-up Handle (18), Tighten an Eyebolt (23) into
the Pull-up Handle,
Repeat this step on the other side of the Top
Frame (4}.
Attach the Upright Cap (21) to the Top Frame (4)
with an M4 x 20mm Self-tapping Screw (94) and
an M4 Washer (36),
Attach the Top Frame (4) to the Upright (3) with
two MIO x 98mm Button Bolts (98), four MIO
Washers (91), and two MIO Nylon Locknuts (74),
10, Attach the Headrest (17) to the Upright (3) with
two M6 x lOOmm Screws (71) and two M6
Washers (85),
10
91
22
2O
23
91
/
91
91
l
91 i
/
17
85
85
9