Gold's Gym POWER FLEX User Manual page 10

11, Grease an MIO x 217mm BoUt(73), Attach the Dip
Arm (5) to the Upright (3) with the BoUtand an MlO
NyUonLocknut (74), Do not overtighten the
Locknut; the Dip Arm must be able to pivot
easily.
Attach the Pin (58) to the Upright (3) with an M4 x
20mm SeUfotappingScrew (94), Insert the Pin into
the Upright,
12, Wet the inside of the two Large Foam Pads (24)
and the Dip Arm (5) with soapy water, SHde the
two Large Foam Pads onto the Dip Arm,
SHde a Dip Arm Cap (65) onto a Dip HandUe (11),
Attach the Dip HandUe and the Dip Arm Cap to
the Dip Arm (5) with an MIO x 80mm Button
Screw (77) and an MlO Washer (91),
Attach the other Dip HandJe (11} and Dip Arm
Cap (65) to the Dip Arm (5) in the same manner.
13, Attach the Seat (15) to the Seat Frame (6) with
four M6 x 16mm Screws (72),
11
12
13
11
15
74
58 Grease
-_-- 94
24
24
/
i
i
72
72
10