Repeating Defects Appear On Prints; Print Is Too Dark - Dell B2360D User Manual

Troubleshooting

Repeating defects appear on prints

Action
Step 1
Measure the distance between the defects.
Check for a distance between the defects that equals:
•
97 mm (3.82 in.)
•
47 mm (1.85 in.)
• 38 mm (1.5 in.)
Is the distance between defects equal to one of the listed measurements?
Step 2
Replace the imaging unit, and then resend the print job.
Do the repeating defects still appear?

Print is too dark

Action
Step 1
a
From the Quality menu on the printer control panel, reduce the toner
darkness.
Note: 8 is the factory default setting.
b
Resend the print job.
Is the print still too dark?
Yes No
Go to step 2.
Contact technical The problem is solved.
support or your Dell
printer dealer.
Yes No
Go to step 2. The problem is solved.
139
1
Check if the
distance between
the defects equal
to 80 mm (3.15 in.)
2
Take note of the
distance, and then
contact technical
support or your
Dell printer dealer.