Layering Two Voices (Dual Mode) - Yamaha Modus F02 Owner's Manual

Layering Two Voices (Dual Mode)

You can layer two Voices and play them simultaneously to create a more richly textured sound.
1.
Call up the Dual mode.
Press two Voice buttons at the same time. The Voice indicators of both selected
Voices will light when the Dual mode is active.
Try playing the keyboard and listen to the resulting sound.
Voice 1/ Voice 2
According to the Voice numbering priority shown below, the lower value Voice
number is designated as Voice 1, and the other Voice as Voice 2.
Voice numbering priority
You can make the following settings for Voices 1 and 2 in Dual:
Shifting the Octave for each Voice (Octave Shift):
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2
independently. Depending on which Voices you combine in Dual mode, the
combination may sound better if one of the Voices is shifted up or down an octave.
While holding down [VARIATION], press one of the A-1 – D0 keys.
Adjusting the Balance between two Voices:
You can finely adjust the balance between the two Voices, layering the two so that
one Voice serves as the main sound and the other provides a subtle accent or a
textured after-sound.
While holding down [VARIATION], press one of the F♯0 – F♯1 keys.
A setting of "0" produces an equal balance between two Voices. Settings below "0"
increase the volume of Voice 2 while settings above "0" increase the volume of
Voice1, in relation to the other.
2.
Exit from the Dual mode.
To return to the normal single-Voice play mode, press any single Voice button.
1 2 3 4
6 7 8 9
Shifting the Adjusting the
octave Volume Balance
0 0 -6 -4 -2 +1+3
-1 +1 -1 +1 -5 -3 -1 0 +2+4+5
Voice 1 Voice 2
5
10
+6
Playing Various Musical Instrument Sounds (Voices)
NOTE
The Dual and Split (page 22)
modes cannot be active at the
same time.
[VARIATION] in Dual Mode
The [VARIATION] button's
indicator lights if the variation is
engaged for either or both of
the Dual mode Voices. While
Dual mode is called up,
[VARIATION] can be used to
turn the variation for both
Voices on or off. To turn the
variation on or off for only one
of the Voices, hold the Voice
button for the other Voice and
press the button of the Voice for
which you want to change the
variation.
[REVERB] in Dual Mode
An optimum reverb type for the
combination of Voices is
assigned automatically.
Default setting of Octave
and Balance:
Different for each Voice
combination.
F02 Owner's Manual
21