Playing Various Musical Instrument Sounds (Voices)
Layering Two Voices (Dual mode)
You can layer two Voices and play them simultaneously to create a more richly textured sound.
Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys
between C1 and A1 to select the two desired Voices. For information on which
Voices are assigned to the keys, refer to "Voice List" (page 18).
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the same
Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5 – F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F♯5 – F♯6 keys. A setting
of "0" (C6) produces an equal balance between two Voices. Settings below "0"
increase the volume of Voice 2, while settings above "0" increase the volume of
Voice 1, in relation to the other.
To exit from Dual mode, press [PIANO/VOICE].
YDP-S52 Owner's Manual
Adjusting the balance
-5 -3 -1
Voice 1 Voice 2
Shifting the octave
The Dual and Duo modes
(page 23) cannot be engaged
at the same time.
-1 – 0 – +1
-6 – 0 – +6