Layering Two Voices (Dual Mode) - Yamaha Clavinova CLP-525 Owner's Manual

Layering Two Voices (Dual mode)

You can layer two Voices and play them simultaneously to create a more richly textured sound.
1.
Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys
between C1 and A1 to select the two desired Voices. For information on which
Voices are assigned to the keys, refer to "Voice List" (page 17).
Lowest key
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the same
Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5 – F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F♯5 – F♯6 keys. A setting
of "0" produces an equal balance between two Voices. Settings below "0" increase
the volume of Voice 2, while settings above "0" increase the volume of Voice 1, in
relation to the other.
2.
To exit from Dual mode, press [PIANO/VOICE].
C1 A1
Engaging
Dual mode
Playing Various Musical Instrument Sounds (Voices)
Adjusting the balance
C5 F5 F♯5 C6
0 -1 -6 -4 -2 +1 +3
-1 +1 0 +1 -5 -3 -1 0
Voice 1 Voice 2
Shifting the octave
NOTE
The Dual and Duo modes
(page 22) cannot be engaged
at the same time.
CLP-525 Owner's Manual
F♯6
+6
+2 +4 +5
Highest key
21