Layering Two Voices (Dual mode)
You can layer two Voices and play them simultaneously to create a more richly textured sound.
Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys between
C1 and A1 to select the two desired Voices. For information on which Voices are
assigned to the keys, refer to "Voice List" (page 16).
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the
same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5-F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F 5–F 6 keys.
A setting of "0" produces an equal balance between two Voices. Settings below "0"
increase the volume of Voice 2 while settings above "0" increase the volume of
Voice1, in relation to the other.
To exit from Dual mode, press [PIANO/VOICE].
YDP-162/142 Owner's Manual
F 5 C6
Voice 1 Voice 2
The Dual and Duo modes
(page 21) cannot be engaged
at the same time.