Copying A User Song In The Instrument To A Usb Flash Memory - Yamaha Modus F02 Owner's Manual

Copying a User Song in the Instrument to a USB Flash Memory

You can copy the User Song (MIDI) in the instrument (page 26) to a USB flash memory.
1.
Connect a USB flash memory to the [USB TO DEVICE] terminal.
2.
Press [BGM], repeatedly if necessary, to make sure the [PRESET 1]/
[PRESET 2]/[USB] lamps are turned off.
3.
While holding down [BGM], press [PLAY/STOP].
A "CPy" indication briefly appears in the display, followed by the User Song
number.
4.
Select a Song number as destination after copying.
Press [-/NO]/[+/YES] to select the Song number (U.00 – U.99). When you select a
Song number containing data, three dots (like "U.X.X. " ) are shown in the display. To
overwrite the selected Song, go to step 5. To avoid overwriting, select another Song
number then go to step 5.
To cancel the Copy operation, press [REC].
5.
Copy the Song.
Press [PLAY/STOP] to start the Copy operation. If an empty Song has been selected
in step 4, press [+/YES]. If a Song containing data is selected in step 4, press [+/
YES] twice. When the Copy operation is completed, "End" will appear in the
display.
To cancel the Copy operation, press [-/NO] in response to "n y" or "n¯y. "
The User Song is saved as SMF format to the "USER FILES" folder in the USB flash
memory, and the file is automatically named as "USERSONGxx.MID" (xx:
numerals).
Using a USB Flash Memory
30
F02 Owner's Manual
2 3 4 5
3 5
NOTE
If the "E01" message appears
on the display, please check
the following.
• Connect a USB flash memory
to the [USB TO DEVICE]
terminal.
• Press [BGM] to turn off the
[PRESET 1]/[PRESET 2]/
[USB] lamps.
• Make sure that recorded data
of a User Song (MIDI) actually
exists.
NOTICE
Do not turn off the power of
the instrument or
disconnect the USB flash
memory when dashes
appear in the display in
succession. Doing so may
corrupt the data on either or
both devices.