Resetting The Configuration To Defaults - Digi PortServer TS 8 Configuration And Administration Manual

Resetting the Configuration to Defaults

Use this section to learn how to use the revert command to reset the all or some of the configuration
factory or to the latest configuration stored in NVRAM.
Note:
To Reset the ...
Entire configuration
altip configuration
arp configuration
auth configuration
set config configuration
set flow configuration
set host configuration
set keysconfiguration
set line configuration
set logins configuration
menu configuration
altip, arp, host, route,
snmp, tcpip, and telnetip
set ports
RADIUS
Routing
set auth, set logins, and
set radius
set flow, set line, set
ports
set service
SNMP configuration
set config, set keys, set
menu, set service, set
terms, set trace, and set
user
set tcpip
set telnetip
set terms
Trace settings
set user
16-6
You can also use the range field on this command to define a range of ports with the
serial, port, line, flow, keys and login options.
To factory defaults specify ...
revert all=factory
revert altip=factory
revert arp=factory
revert auth=factory
revert config=factory
revert flow=factory
revert host=factory
revert keys=factory
revert line=factory
revert login=factory
revert menu=factory
revert network=factory
revert port=factory
revert radius=factory
revert routed=factory
revert security=factory
revert serial=factory
revert service=factory
revert snmp=factory
revert system=factory
revert tcpip=factory
revert telnetip=factory
revert terms=factory
revert trace=factory
revert users=factory
To the latest version in NVRAM
specify...
revert all=nvram
revert altip=nvram
revert arp=nvram
revert auth=nvram
revert config=nvram
revert flow=nvram
revert host=nvram
revert keys=nvram
revert line=nvram
revert login=nvram
revert menu=nvram
revert network=nvram
revert port=nvram
revert radius=nvram
revert routed=nvram
revert security=nvram
revert serial=nvram
revert service=nvram
revert snmp=nvram
revert system=nvram
revert tcpip=nvram
revert telnetip=nvram
revert terms=nvram
revert trace=nvram
revert users=nvram

Resetting the Configuration to Defaults