Digi PortServer TS 8 Configuration And Administration Manual page 64

Hide thumbs Also See for PortServer TS 8:

Table of Contents

Configuring RADIUS: Command Line

To configure PortServer TS 8/16 to function as a RADIUS client, supply a set radius command

that specifies the following:

•

run=on

•

The IP address of the primary RADIUS server (on the primary field). The primary server is the

first server to which authentication requests are sent.

•

A password (on the secret field)

Note

To use a secondary RADIUS server, supply a second set radius command that specifies run=on,

the IP address of the secondary server (on the secondary field) and another password for the

secondary server (on the secret field).

RADIUS Command Line Configuration Example

set radius run=on primary=199.123.15.129 secret=J9CxegpP

12-6

Using RADIUS to Authenticate Users

Table of Contents

Show Quick Links

Table of Contents

Portserver ts 16 Connectware portserver ts 8/16