Table of Contents
Advertisement
Verifying the PortServer TS 8/16 IP Address
Use this procedure to check the IP address on the PortServer TS 8/16.
1. Connect a terminal to a PortServer TS 8/16 port.
2. If the port is still using the default configuration, configure the terminal to use the following set-
tings (Otherwise, configure the terminal to match the port configuration):
•
VT-100 emulation
•
9600 baud
•
8-bit characters
•
1 stop bit
•
No parity
3. Press Enter to get a logon prompt from the PortServer TS 8/16.
4. Log on to the PortServer TS 8/16.
5. Use the set config command to verify the PortServer TS 8/16 IP address.
17-8
Verifying the PortServer TS 8/16 IP Address
Hide quick links:
Advertisement
Table of Contents
