Digi PortServer TS 8 Configuration And Administration Manual page 79

Copying a Configuration File from a Host to
This section describes how to copy the configuration file from a host to PortServer TS 8/16 after the
file has been edited on the host.
Related Information
See the cpconf command in the Digi One/PortServer TS Command Reference.
Starting Point
This procedure assumes that you
• Have edited a configuration file on a host and now want to copy it to PortServer TS 8/16 for use
• Are logged in to PortServer TS 8/16 as root, which is a requirement for using the cpconf com-
mand to copy the configuration file to a host
Supply a cpconf command with a fromhost field that specifies the following:
• The IP address of the source host
• The name of the configuration file on the host
Example
cpconf fromhost=199.250.121.12:cnfg-fle
Managing the OS and Configuration
PortServer TS 8/16
16-5