Symptom: Portserver Ts 8/16 Does Not Boot - Digi PortServer TS 8 Configuration And Administration Manual

Symptom: PortServer TS 8/16 Does Not Boot

Introduction
Use the information provided in this discussion when PortServer TS 8/16 will not complete the boot
cycle.
Procedures
Check for hardware problems.
Check for TFTP problems if Port-
Server TS 8/16 is booting from a
TFTP host.
Resetting the device to configura-
tion defaults.
If you cannot resolve the problem,
contact Digi.
17-2
Things to Try See ...
• "Running PortServer TS 8/16 Hardware
Diagnostics" on page 17-4
• "Running PortServer TS 8/16 POST" on
page 17-5
• "Verifying TFTP on a UNIX System" on
page 17-6
• "Troubleshooting TFTP Problems" on
page 17-6
"Resetting PortServer TS 8/16 Configuration
to Defaults" on page 17-7
"Digi Contact Information" on page 17-16

Symptom: PortServer TS 8/16 Does Not Boot