Code I.d. Selection; Example: Setting The Ean Ucc Composite Code I.d - Datalogic QuickScan QS6500 Product Reference Manual

EAN UCC Composite — continued

Code I.D. Selection

The Code I.D. for this symbology consists of one or two user-selectable
ASCII characters. It can be appended previous to or following the trans-
mitted EAN UCC Composite bar code data depending on how this fea-
ture is enabled.

Example: Setting the EAN UCC Composite Code I.D.

To configure this feature:
1. Determine which character(s) you would like to use to represent
the EAN UCC Composite symbology. Reference
ASCII Conversion Chart
your chosen character(s). In this example we'll set a Code I.D. of
"RC" to represent EAN UCC Composite. The value from the
table corresponding to ''R' is 52, for 'C', 43. These value will be
used in a step to follow.
2. Scan the START bar code
3. Scan the SET EAN UCC COMPOSITE I.D. bar code.
4. Turn to
Appendix B, Alpha-Numeric Pad
and '2' (the value determined in an earlier step to represent 'R'),
then the bar codes '4' and '3' to represent the letter 'C'.
5. Scan the SET bar code to accept the digits scanned.
6. Turn to the
Data Editing
TION: BEFORE BAR CODE DATA label.
Features configured using the
universal and will affect all symbologies.
NOTE
7. Scan the END bar code to exit Programming Mode.
8. The resulting message string for scanned EAN UCC Composite
labels would appear as follows:
Scanned bar code data:
Resulting message string output: RC0123456789123
Product Reference Guide
EAN UCC Composite
to find the corresponding hex values for
and scan the bar codes '5'
chapter and scan the CODE ID POSI-
Data Editing
0123456789123
Appendix A,
chapter are
6-199