Symbologies
EAN-13 — continued
ISBN ID Setting
Sets the Code ID used for labels that are translated to ISBN/ISSN num-
bers. The Code I.D. for this symbology consists of one or two user-
selectable ASCII characters. It can be appended previous to or following
the transmitted bar code data depending on how this feature is enabled.
Example: Setting the ISBN ID
To configure this feature:
1. Determine which character(s) you would like to use to represent
ISBN/ISSN translated labels. Reference
, to find the corresponding hex values for your chosen
sion Chart
character(s). In this example we'll set a Code I.D. of "I" to repre-
sent ISBN/ISSN. The value from the table corresponding to 'I' is
49. This value will be used in a step to follow.
2. Scan the START bar code
3. Scan the SET ISBN CODE I.D. bar code.
4. Turn to
Appendix B, Alpha-Numeric Pad
and '9' (the value 49 determined in an earlier step to represent a
Code I.D. of 'I').
5. Scan the SET bar code to accept the digits scanned.
6. Turn to the
Data Editing
TION: BEFORE BAR CODE DATA label.
Features configured using the
universal and will affect all symbologies.
NOTE
7. Scan the END bar code to exit Programming Mode.
8. The resulting message string for converted ISBN/ISSN labels
would appear as follows:
Scanned bar code data:
Resulting message string output: I97801234565
6-22
Appendix A, ASCII Conver-
and scan the bar codes '4'
chapter and scan the CODE ID POSI-
Data Editing
97801234565
®
QuickScan
QS6500/QS6500 BT
chapter are