Specifications; General Specifications; Table A-1. Ipmc Specifications - Emerson I/O MODULE IPMC7126E Installation And Use Manual

Specifications

A

General Specifications

The following table provides general specifications for the IPMC712 and IPMC761 module.

Table A-1. IPMC Specifications

Main
Characteristic
PMC
Interface
SCSI Bus
Synchronous
Serial Ports
Asynchronous
Serial Ports
Parallel Ports
Function
Address/Data
PCI Bus Clock
Signaling
Module Type
Controller
PCI Local Bus DMA
Asynchronous Transfer Rate
Ultra-SCSI Transfer Rate
Connector
Controller
Number of Ports
Configuration
Baud Rate (BPS Max)
Connector
Controller
Number of Ports
Configuration
Asynchronous Baud Rate
(BPS Max)
Connector
Controller
Configuration
Modes
Connector
IPMC7126E/7616E I/O Module Installation and Use (6806800A45B)
Specification
A32/D32/D64, PMC PN1, PN2, PN3, PN4
Connectors
33 MHz
5 Volts
Basic, Single-Wide; P2 I/O
Symbios 53C895A
Yes, with PCI Local Bus Burst
5.0MB/s
20.0MB/s (8-Bit Mode), 40.0MB/s
(16-Bit Mode)
Routed to P2, 50 or 68 Pin on P2
85230/8536
2
TTL to P2 (Both Ports), SIM on MVME761
2.5M Synchronous, 38.4K Asynchronous
Routed to P2, HD-26 on MVME761
16C550 UART
2 (16550 Compatible)
EIA-574 DTE
38.4 EIA-232, 115Kbps Raw Transfer Rate
Routed to P2, DB-9 on MVME761
PC97307
8-Bit Bi-Directional, Full IEEE 1284 Support,
Centronics Compatible
Master Only
Routed to P2, HD-36 on MVME761
A
33