Chapter 3 Programming
The IDSEL assignments for both modules are shown below:
Table 3-3. IDSEL and IDSELB Mapping for PCI Devices
Device Number
Field
0b0_1011
0b1_0000
0b1_0001
0b1_0101
The following table shows the Vendor ID, the Device ID, and Revision ID for each of the planar
PCI devices on the IPMC712 and IPMC761:
Table 3-4. On-Board PCI Device Identification
Device
SCSI Controller
PCI-ISA Bridge
PCI Arbitration Assignments on Host Boards
The IPMC module PCI arbitration is provided by the host board.
MVME5100
The MVME5100 PCI arbitration is performed by the Hawk ASIC on the host board which
supports eight external PCI masters. Included is the Hawk itself and seven external PCI
masters. The arbitration assignments for the IPMC712 and IPMC761, when installed on the
MVME5100, are as follows:
Table 3-5. PCI Arbitration Assignments
PCI Bus Request
Request 1 (PARBI1)
Request 2 (PARBI2)
MVME5500
The MVME5500 IPMC module PCI arbitration is performed using logic implemented in
Programmable Logic Devices (PLDs). These arbiters use a rotating priority scheme for fairness
and bus parking and will always be on the GT-64260B. There are no software programmable
modes to these arbiters.
18
IPMC7126E/7616E I/O Module Installation and Use (6806800A45B)
PCI Address Line
IDSEL Connection
AD11
PCI/ISA Bridge
AD16
PMC Slot 1 SCSI Device
AD17
PMC Slot 1 MVME5500
AD21
PMC Slot 1 MVME6100
Device
Vendor ID
LSI SYM53C895A
0x1000h
W83C554F
0x10ADh
PCI Master(s)
PMC Slot 1 (SCSI device on the module in PMC Slot 1)
PIB device on the module in PMC Slot 1
Device ID
Revision ID
0x0012h
0x00h
0x0565h
XXh