Table of Contents
Advertisement
The IPMC7126E/7616E I/O Module Installation and Use manual provides the information you
will need to install, use, and program your IPMC7126E or IPMC7616E module. These are
optional I/O modules installed on the variants of the MVME5100, MVME5500 and MVME6100
Single Board Computers (SBCs). Their design utilizes the PowerPlus II architecture. Hereafter,
the IPMC7126E and IPMC7616E modules will be referred to as the IPMC712 and IPMC761.
The IPMC712 is a variation of the IPMC761 The primary differences between the two modules
are in the physical interfaces of the Ethernet port and serial ports 3 and 4. These differences
along with others are discussed in the following chapters of this manual.
As of the printing date of this manual, these I/O module models are available:
Model Number
IPMC7126E-002
IPMC7616E-002
This manual is organized as follows:
■
Chapter 1, Product Features
■
Chapter 2, Installing the IPMC Module
■
Chapter 3, Programming
■
Chapter 4, Connector Pin Assignments
■
Appendix A, Specifications
■
Appendix B, Related Documentation
Summary of Changes
See the table below for manual revisions and changes.
Part Number
6806800A45B
Product Description and I/O Features
Multifunction rear I/O PMC module; Ultra-Wide SCSI, one parallel port,
three asynchronous and one synchronous/asynchronous serial port
Multifunction rear I/O PMC module; Ultra-Wide SCSI, one parallel port,
two asynchronous and two synchronous/asynchronous serial ports
Date
Description
September 2008
Update document to Emerson style (logo, copyright,
trademarks, etc.)
IPMC7126E/7616E I/O Module Installation and Use (6806800A45B)
About This Manual
xi
Advertisement
Table of Contents
