Sense Data (3-0C-03), (4-32-00), (4-40-Xx), And (4-C4-Xx); Sense Data (1-1X-Xx), (3-1X-Xx) And (E-1D-00): Disk Read Error; Sense Data (4-44-Xx), (5-2X-Xx), (5-90-00), (B-44-Xx), (B-47-Xx), (B-48-00); (B-49-00), (B-4D-Xx) And (B-4E-00): Scsi Interface Error - Fujitsu MBA3073NC - Enterprise 73.5 GB Hard Drive Product Manual

Product manual
Hide thumbs Also See for MBA3073NC - Enterprise 73.5 GB Hard Drive:
Table of Contents

Advertisement

7.2.2
7.2.3
7.2.4
116
Downloaded from
www.Manualslib.com

Sense data (3-0C-03), (4-32-00), (4-40-xx), and (4-C4-xx)

Sense data (3-0C-03), (4-32-00), (4-40-xx), and (4-C4-xx) indicate one of the following:
A target sector could not be detected using the sector counter.
A seek process overran the specified time.
A write to a disk terminated abnormally.
Failed to allocate the alternate block in the alternate processing.
An error occurred in power-on self-diagnosis.
An HDD error occurred.
The symptoms above are generally caused by an error in the PCBA or the DE.

Sense data (1-1x-xx), (3-1x-xx) and (E-1D-00): Disk read error

If sense data (1-1x-xx), (3-1x-xx) or (E-1D-00) occurs frequently in a specific block of a disk,
there is disk damage that was not recorded in the media defect list. In this case, assign an alternate
block to the error-detected block using a REASSIGN BLOCKS command. For an explanation of
the REASSIGN BLOCKS command, refer to Subsection 3.3.2 "REASSIGN BLOCKS (07)" of
the SCSI Logical Interface Specifications.
If this error occurs in different blocks, the PCBA or the DE is faulty.
Sense data (4-44-xx), (5-2x-xx), (5-90-00), (B-44-xx), (B-47-xx), (B-48-00), (B-49-00),
(B-4D-xx) and (B-4E-00): SCSI interface error
Sense data (5-2x-xx), (5-90-00), (B-44-xx), (B-47-xx), (B-48-xx), (B-49-00), (B-4D-xx)
and (B-4E-00) indicates one of the following symptoms:
An invalid or unsupported command was issued, or invalid or unsupported parameters were
specified.
A SCSI interface error occurred.
A hardware error occurred inside the HDD.
A parity error occurred in the SCSI bus.
If this error occurs, the PCBA or the SCSI interface cable is faulty.
manuals search engine
C141-E270

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mba3300ncMba3147ncMba3147npMba3073npMba3300 np series

Table of Contents