Figure 4.8 Current Waveform (Max Seek); Figure 4.9 Power On/Off Sequence (1) - Fujitsu MBA3073NC - Enterprise 73.5 GB Hard Drive Product Manual

+5VDC
+12VDC
(3)
C141-E270
Downloaded from www.Manualslib.com
Figure 4.8 shows the max seek current waveform of +5V DC and +12V DC.
MBA3300NC
MBA3300NP
Time (10 msec/div)
MBA3300NC
MBA3300NP
Time (10 msec/div)
Figure 4.8
Power on/off sequence
a) The order of the power on/off sequence of +5V DC and +12V DC, supplied to the HDD, does
not matter.
b) In a system which uses the terminating resistor power supply signal (TERMPWR) on the
SCSI bus, the requirements for +5V DC given in Figure 4.9 must be satisfied between the
HDD and at least one of the SCSI devices supplying power to that signal.
Figure 4.9
manuals search engine
MBA3147NC
MBA3147NP
Time (10 msec/div)
MBA3147NC
MBA3147NP
Time (10 msec/div)
Current waveform (Max seek)
Power on/off sequence (1)
MBA3073NC
MBA3073NP
Time (10 msec/div)
MBA3073NC
MBA3073NP
Time (10 msec/div)
55